As an Amazon Associate I earn from qualifying purchases.1. E-BEST-OFFER
E-BEST-OFFER 10mm replacement connector for spiral/curly hose pack of 2
E-BEST-OFFER - Fits 10mm hoses. Pack of 2. Compatible with hozelock fittings. Use with spiral hoses. Easy to fit.
2. Hose Pipe / Tube Connectors
FREE FIRST CLASS UK POSTAGE!, 2x 10mm 3/8" Straight In-Line Hose Tube Pipe Connector Joiner Air Fuel Water
Hose Pipe / Tube Connectors - The quality when purchased from other suppliers cannot be guaranteed. This product listing is by 227sparts. Please see the above link to our Amazon Shop Storefront 227sparts for our full range of Auto Trim Clips and other workshop consumables.
3. BILBAU
10 & 12.5 mm Hoses, 20g, Water, for 8, Bilbau Straight Solid Hose Tail Connector, 9 x 8 x 8 cm, Fuel, Perfect Barb Fitting, for Gas, 10 mm, Air & More, Brass, Easy to Mount
BILBAU - Made in the EU. P> easy and convenient to install. Straight connector for 8, 10, 12, 5mm hose - BRASS. Can be used to connect air hose, fuel hose, water hose, gas hose, etc. P> an ideal hose barb fitting.
| Brand | BILBAU |
| Manufacturer | BFG |
| Height | 8 cm (3.15 Inches) |
| Length | 9 cm (3.54 Inches) |
| Width | 8 cm (3.15 Inches) |
| Part Number | FJ-9J3G-BHU9 |
| Model | FJ-9J3G-BHU9 |
4. sourcing map
Sourcing map Brass Barb Hose Fitting Connector Adapter 10mm Barbed x G1/2 Female Pipe with 6-12mm Hose Clamp 2Set
sourcing map - Advantage - the barbed end creates a tight seal on the flexible and semi-rigid tubes when used with a pipe clamp. Size - barb outer diameter: 10mm / 039 inch; female thread Size: G1/2Approx ID 18.
6mm. Note - please confirm the correct size before ordering. Material - made of brass for higher strength and corrosion resistance. Application - the barb hose fitting connector is commonly used to connect lines for air, water, fuel and gas in a quick and simple way.
5. BFG
Solid Brass Hose Tail Connector Barbed to BSP Male Thread. Pond / Pool / Hose Pipe Adapters 10 mm to 1/2" BSP Thread
BFG - Hygiene certificate b-bK-60210-0134 / 20 Working pressure 10 bar. Versatile: hose screw connection made of brass and copper alloy, with internal thread, for convenient connection of hoses to the tap.
Suitable for commercial and private areas in accordance with DIN EN 1254-4: 1998-03. Temperature-resistant and absolutely tight: the reducer is temperature-resistant in the temperature range up to 90 ° C.
Different versions: the screw connection is available in different versions. For cold and warm water as well as for drinking water: Suitable for installation in water systems of various types. Before purchasing, please see the product dimensioning and the animation showing how to measure the product thread and the existing installation.
| Brand | BFG |
| Manufacturer | BFG |
| Height | 3.9 cm (1.54 Inches) |
| Length | 2.1 cm (0.83 Inches) |
| Width | 2.1 cm (0.83 Inches) |
6. sourcing map
10mm Barb G1/2 Female Thread Pipe Adapter, sourcing map Brass Hose Barb Fitting Connector, 2Pcs
sourcing map - Barb design is convenient and easy to use. Universal design- fit hose inner dia: 10mm; female thread Size: G1/2Approx ID 18. 6mm. In addition, adding a pipe clamp can effectively prevent leakage and slip off.
Material- female straight barb fitting is made of brass, which has good resistance to high temperature and corrosion. Sold separately. Application- used widely in gardens, leaking pipe repairs, home brewing, air compressors, water tanks, fuel tanks, dryers, bathrooms, washing machines, water heaters, swimming pools, etc.
Installation- we suggest putting the hose in hot water a few seconds if it is too small to install. Feature- the female thread end is connected to a fixed male tube, and sealing tape is added to ensure the sealing effect. Barb end is connected to a hose.
| Brand | sourcing map |
| Manufacturer | sourcing map |
| Height | 3 cm (1.18 Inches) |
| Length | 5 cm (1.97 Inches) |
| Width | 3.99 cm (1.57 Inches) |
| Part Number | a18113000ux0284 |
7. BGS
BGS 8790-10 Hose Connector Assortments Fuel Resistant 10 mm 8-Piece
BGS - 3 y connector for connecting 3 hoses. Material: poM, fuel-resistant, white. 3 t connector for connecting 3 hoses. 2 i connector for connecting 2 hoses. For connecting plastic and rubber hoses. Suitable for 10 mm hose inner diameter.
| Brand | BGS |
| Manufacturer | BGS technic |
| Height | 3 cm (1.18 Inches) |
| Length | 17 cm (6.69 Inches) |
| Weight | 0.04 kg (0.09 Pounds) |
| Width | 11 cm (4.33 Inches) |
| Part Number | 8790-10 |
| Model | 8790-10 |
8. posionks
JUN-H 4Pcs 10mm 3-Way Brass Connector Hose Extension Connector Garden Hose Connection Compressed Air Hose Connector Fuel Hose Connector T-Piece
posionks - Product features: t-type brass hose connector is a barb type with three interfaces that can be divided into two. Application: the three-way fuel hose connector can be used to connect air, water, oil, gas, fuel and other corrosive or non-corrosive liquids.
Product material: brass, made of solid brass, can be used for a long time. Product size: three interfaces with a diameter of 10mm, a length of 48mm, a height of 29mm. Packing: 4 pieces. It is easy to install and insert and relatively difficult to pull out. The fastening clip is very strong and durable and not easy to leak and separate.
| Brand | posionks |
| Manufacturer | JUN-H |
| Part Number | part_B08GCMK5DK |
| Model | part_B08GCMK5DK |
9. sourcing map
Sourcing map 10mm Barb Brass Hose Fitting 90 Degree Elbow Pipe Connector Coupler Tubing 4pcs
sourcing map - Commonly used to connect lines for air, fuel, water, oil and inert gases in a quick and simple way. The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included.
This coupling has barbed connections on both ends for connecting two hoses at an angle. Barb dia. Fit hose id: 10mm3/8"; barb lengthapprox. 23mm / 091"; total size: 38mm x 38mm x 11mm /1. 5" x 1. 5" x 043"l*h*t. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
10. AnvFlik
10mm Barb G1/2 Female Hose Thread Pipe Adapter, 2Pcs Brass Garden Hose Swivel Fitting, Connector
AnvFlik - High quality materialbrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Universal design fit hose inner dia: 10mm; female thread size: G1/2Approx ID 18.
6mm. Installationwe suggest putting the hose in hot water a few seconds if it is too small to install. Sold separately. Used widely for gardens, leaking pipe repairs, water tanks, dryers, swimming pools, air compressors, fuel tanks, water heaters, bathrooms, washing machines, home brewing, etc.
Featurebarbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Adapter for connecting a hose to a male threaded. In addition, adding a pipe clamp can effectively prevent leakage and slip off.
E-BEST-OFFER - Fits 10mm hoses. Pack of 2. Compatible with hozelock fittings. Use with spiral hoses. Easy to fit.
sourcing map - Advantage - the barbed end creates a tight seal on the flexible and semi-rigid tubes when used with a pipe clamp. Size - barb outer diameter: 10mm / 039 inch; female thread Size: G1/2Approx ID 18. 6mm. Note - please confirm the correct size before ordering. Material - made of brass for higher strength and corrosion resistance. Application - the barb hose fitting connector is commonly used to connect lines for air, water, fuel and gas in a quick and simple way.
BFG - Hygiene certificate b-bK-60210-0134 / 20 Working pressure 10 bar. Versatile: hose screw connection made of brass and copper alloy, with internal thread, for convenient connection of hoses to the tap.
sourcing map - Barb design is convenient and easy to use. Universal design- fit hose inner dia: 10mm; female thread Size: G1/2Approx ID 18. 6mm. In addition, adding a pipe clamp can effectively prevent leakage and slip off.
posionks - Product features: t-type brass hose connector is a barb type with three interfaces that can be divided into two. Application: the three-way fuel hose connector can be used to connect air, water, oil, gas, fuel and other corrosive or non-corrosive liquids. Product material: brass, made of solid brass, can be used for a long time. Product size: three interfaces with a diameter of 10mm, a length of 48mm, a height of 29mm. Packing: 4 pieces. It is easy to install and insert and relatively difficult to pull out. The fastening clip is very strong and durable and not easy to leak and separate.
sourcing map - Commonly used to connect lines for air, fuel, water, oil and inert gases in a quick and simple way. The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule not included. This coupling has barbed connections on both ends for connecting two hoses at an angle. Barb dia. Fit hose id: 10mm3/8"; barb lengthapprox. 23mm / 091"; total size: 38mm x 38mm x 11mm /1. 5" x 1. 5" x 043"l*h*t. This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
