As an Amazon Associate I earn from qualifying purchases.1. Primaflow
3/4 Inch Part 2 High Pressure Float Valve
Primaflow - This listing is for a Pack of 1. If your thread measures 3/4 Inch in diameter then you require the 1/2 Inch version of this product. This 3 4 float valve is for use in high pressure systems, reduces water hammer and knocking and with a quick response on shut off and turn on.
Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter.
This high pressure float valve is anti-corrosion and can be used with recycled water. This 3/4" part 2 high pressure ballcock Valve is fully sealable under the higher pressure, maximum 16 bar, and high temperture.
| Brand | Primaflow |
| Manufacturer | Primaflow |
| Weight | 0.41 kg (0.9 Pounds) |
| Part Number | 10011364 |
| Model | mk143 |
2. Embrass
1/2" Part 2 High Pressure Brass ball Valve
Embrass - Ideal for central heating header and supply tanks. Bs1212 part 2 in brass. Excludes poly float available separately. Brass 1/2" bsp part 2 ballvalve with adjustable brass arm. Suitable for mains high pressure only.
| Brand | Embrass |
| Manufacturer | Centurian |
| Height | 0.1 cm (0.04 Inches) |
| Length | 1.2 cm (0.47 Inches) |
| Weight | 0.29 kg (0.64 Pounds) |
| Width | 1.2 cm (0.47 Inches) |
| Part Number | CENPA25L |
| Model | ki197 |
3. Primaflow
8" Round Filling Valve Float
Primaflow - This listing is for a Pack of 1. Threaded into 7/16 inch brass insert for extra strength. 7/16 inch bSP thread. To suit 1 inch BSP Float Valves. 8 inches in diameter.
4. Primaflow
3/4" High Pressure Float Valve with 14" Arm
Primaflow - Important sizing note - most plumbing products are measured using bsp thread dimensions which measure 1/4 inch larger than that stated, therefore this 3/4 Inch BSP thread actually measures 1 Inch in diameter.
This 3 4 float valve is for use in high pressure systems, reduces water hammer and knocking and with a quick response on shut off and turn on.
This 3 4 float valve is fully sealable under the higher pressure, maximum 16 bar, and high temperture. If your thread measures 3/4 Inch in diameter then you require the 1/2 Inch version of this product. This listing is for a Pack of 1. This high pressure float valve is anti-corrosion and can be used with recycled water.
5. REEDS
Ball Valve 1/2" Part 1 Brass Ball Valve High Pressure Reeds
REEDS - Brass Ball Valve. Suitable for high pressure incoming water mains. Wras approved BS1212. 1 year Warranty. Designed with interchangeable parts to make replacement easy.
6. Tatuo
3 Pack Reliable Water Float Ball Valve Shut off 1/2 Inch Automatic Fill Feed Humidifier Water Tank, Pond Float Replacement Valve, Water Ball Valve
Tatuo - Good sealing effect and higher pressure resistance: with a smaller water level float ball, the float fill valve can withstand higher liquid pressure = 1 MPA. Reliable and durable: mini tank float valve is made of special engineering plastics, corrosion resistance, more reliable than traditional metal products.
Easy installation and flexible adjustment: these float check valve can be installed at any angle with the adjustable arm; Tank mount with extended threads on inlet side of valve for mounting through tank wall.
Wide applications: the floating shut off valve is widely applied in reverse osmosis system, fish aquarium, ponds, etc. Also for watering chickens and other small livestock and pets. Fit 1/2 inch supply tube: the automatic floating ball valve is an upgrade product, based on the design of new technology and overcoming many defects of traditional straight sealing valve.
| Brand | Tatuo |
| Manufacturer | Tatuo |
| Height | 4 cm (1.57 Inches) |
| Length | 19 cm (7.48 Inches) |
| Width | 4 cm (1.57 Inches) |
| Part Number | Tatuo-Water Float Ball-01 |
Primaflow - This listing is for a Pack of 1. If your thread measures 3/4 Inch in diameter then you require the 1/2 Inch version of this product. This 3 4 float valve is for use in high pressure systems, reduces water hammer and knocking and with a quick response on shut off and turn on.
Embrass - Ideal for central heating header and supply tanks. Bs1212 part 2 in brass. Excludes poly float available separately. Brass 1/2" bsp part 2 ballvalve with adjustable brass arm. Suitable for mains high pressure only.
Tatuo - Good sealing effect and higher pressure resistance: with a smaller water level float ball, the float fill valve can withstand higher liquid pressure = 1 MPA. Reliable and durable: mini tank float valve is made of special engineering plastics, corrosion resistance, more reliable than traditional metal products.
