Top 7 Deta Extractor Fan UK – Bathroom Fans

As an Amazon Associate I earn from qualifying purchases.

1. Deta

Deta 4601 Axial Extractor Fan 4 Inch / 100mm Timer Model

Deta - Ce approved. 99mm diameter spigot, extends for 80mm. Sound output 29dBA @ 3m. Easy to install and suitable for wall or ceiling mounting. Backdraught strips. This model is for operation with the room light switch see product description below.

An extremely quiet and efficient fan, providing excellent low energy and low noise performance. Stylish 4” 100mm axial extractor fan with curved design front cover. Ideal for modern bathrooms and toilets. Manufactured to bs en 60335-2-80 Easy to install and suitable for wall or ceiling mounting.

Ideal for modern bathrooms and toilets. Mains voltage 230/240v ac 50hz. Dimensions: 152mm wide x 152mm tall x 20mm deep beyond installed surface. 25 litres per second, 90 cubic metres per hour extraction rate. Timer adjustable between 2 and 30 minutes. Ip24 rated - suitable for use in zone 2 if circuit protected by RCD. 8 watts power consumption.
BrandDeta
ManufacturerDeta
Part Number4601

2. Deta

NO TIMER, Deta 4600 Axial Extractor Fan 4 Inch / 100mm Standard Model

Deta - 8 watts power consumption. 25 litres per second, 90 cubic metres per hour extraction rate. Ip24 rated - suitable for use in zone 2 if circuit protected by RCD. Manufactured to bs EN 60335-2-80 Sound output 29dba @ 3m. Ce approved. Dimensions: 152mm wide x 152mm tall x 20mm deep beyond installed surface. 99mm diameter spigot, extends for 80mm. Mains voltage 230/240v ac 50Hz. Backdraught strips.
BrandDeta
ManufacturerDeta
Part Number4600

3. Deta

Deta 4603 Axial Extractor Fan 4 Inch / 100mm Humidistat/Timer Model

Deta - Manufactured to bs EN 60335-2-80 Timer adjustable between 2 and 30 minutes. Sound output 29dba @ 3m. Dimensions: 152mm wide x 152mm tall x 20mm deep beyond installed surface. 99mm diameter spigot, extends for 80mm. 25 litres per second, 90 cubic metres per hour extraction rate. Ip24 rated - suitable for use in zone 2 if circuit protected by RCD. See important information about connection requirements in product description. 8 watts power consumption. Mains voltage 230/240v ac 50hz. Ce approved. Backdraught strips.
BrandDeta
ManufacturerDeta

4. Deta

Deta 4640 in-Line Shower Extractor Fan Kit Timer Model

Deta - Sound output 33dba @ 3m. Ce approved. Manufactured in compliance with BS EN 60335-2-80 Extraction rate up to 30 litres per second, 107 cubic meters per hour. Exterior grille 154mm wide x 154mm tall x 11mm deep visible x 25mm projection. Timer adjustable at installation between 2 and 20 minutes. 14 watts power consumption. See important note regarding electrical connection requirements in Product Description. Interior grilles 28mm diameter x 2mm visible x 25mm rear projection. Dimensions: fan 160mm wide x 115mm deep x 115mm tall. Mains voltage 230/240v ac 50hz.
BrandDeta
ManufacturerDeta

5. DETA Ventilation

12V Bathroom Extractor Fan with Timer Transformer Humidity 100mm 4" Shower Low Volatage

DETA Ventilation - Built in timer & humidistat the fan will stay on for a set duration or until the set humidity is reached. Transformer included not all 12v bathroom extractor fans come with a transformer! Low noise bathroom fan less than 30 db max. Ceiling mounted so can be used directly above a shower or bath to remove condensation can be wall mounted as well. Low voltage 12v extractor fans are safer and can be used in zone1 in bathrooms.
BrandDETA Ventilation
ManufacturerDETA

6. Manrose

Manrose QF100T Quiet Extractor Fan with Timer for 4"/100mm Duct

Manrose - Unique turning vane technology. Ip rating: IP44. Note: product is tested in an anechoic chamber to a recognized standard. Quiet operation at 27db. Timer over run, backdraught shutter.
BrandManrose
ManufacturerManrose
Height16.3 cm (6.42 Inches)
Length16.3 cm (6.42 Inches)
Width11.1 cm (4.37 Inches)
Part NumberQF100T
ModelQF100T
WarrantyN/a.

7. Deta

Deta 1949CHW Fan Isolator Switch TP Polished Chrome/White Insert, 10 Amp

Deta - Can be used as a 1 way light switch. Manufactured to BS EN 60669. Normally used as isolator for extractor fans. 10 amp maximum load. Dimensions: 87mm high x 87mm wide x 7mm deep plate. 3 pole - 3 connections in, 3 connections out excluding earth. 11mm rear projection.
BrandDeta
ManufacturerDeta
Part Number1949CHW