As an Amazon Associate I earn from qualifying purchases.
Battery Charger, 24V Lead-Acid Battery Charger Smart Battery Charger for Long-term Supplementary Charging of Lead-acid BatteryYanmis
- Built-in pfc circuit, the highest power factor can be calibrated to 099 or above. Useing two-stage charging method constant current first and then constant voltage for automatic charging, which can be fully charged according to the charging characteristics of the battery to prevent the lead-acid battery from overcharging and maximiz.
External led status display: green power lamp indication; red charging light indication.
Adopting switching power supply structure, small size, light weight, wide input voltage range, high efficiency. The built-in current protection circuit can effectively protect the charger in case of overcurrent, short circuit and reverse connection, and the power indicator and charging indicator will flash quickly as the alarm signal.
|Height||0 cm (0 Inches)|
|Length||0 cm (0 Inches)|
|Weight||0.69 kg (1.52 Pounds)|
|Width||0 cm (0 Inches)|
Toolland AC30 Lead Acid Battery Charger 12/24V with Boost Function 20ATOOLLAND
- Quality product. Reputable Brand. Charger for lead acid battery - 12/24 v - with boost function - 20A.
|Height||23 cm (9.06 Inches)|
|Length||26.5 cm (10.43 Inches)|
|Weight||11.6 kg (25.57 Pounds)|
|Width||37.5 cm (14.76 Inches)|
Mogzank 12V 3A Lead-Acid Charger MPPT Solar Controller Battery Charging ModuleMogzank
- 2v lead-acid battery dedicated charge management integrated circuit has MPPT-solar cell high power point tracking. In overcharge and floating charge modes, the typical charge voltages are 14.
8v and 13. 55v, constant current, the charge current is set by an external resistor. With trickle, respectively; in constant current charge mode, overcharge and floating charge modes, it is very suitable for charging 12V lead-acid batteries.
Pwm step-down mode 12v lead-acid battery charge management integrated circuit, which independently manages lead-acid battery charge automatically. It has the advantages of small package size, few peripheral components and simple use.
|Height||2 cm (0.79 Inches)|
|Length||6 cm (2.36 Inches)|
|Weight||0.01 kg (0.03 Pounds)|
|Width||4 cm (1.57 Inches)|
Lead-acid Lithium Battery Overcharge Protection Board Charging Control Module with LED Indicator, 12V 24V 48V Battery Charger BoardWalfront
- Memory function:this battery protection board can save parameters when power failure to avoid repeated settings. Multi-function:it with energy saving mode and restore to factory setting function, also a LED light indicator to show the charging status.
User-friendly:lower digital tube display brightness, which can save energy and protect your eyes.
Tvs surge protection:this protection board supports power supply TVS surge protection, when power on, the TVS can reduce instantaneous high voltage to protect circuit. Accurate measurement:the 1% high divider resistor makes voltage measurement more accurately, and the voltage and resolution is 01 v, and has calibration function.
|Height||6 cm (2.36 Inches)|
|Length||8 cm (3.15 Inches)|
|Weight||0.05 kg (0.11 Pounds)|
|Width||7 cm (2.76 Inches)|
|Part Number||Wal frontdg15mqvcei|
MHB MS7-6 Lead Acid Sealed Rechargeable SLA Battery 6v 7Ah Fire Alarm Panel Back UpMHB
- A mhb branded product distributed by Petrolscooter. A quality lead acid Sealed Rechargeable Battery designed for Fire Alarms. All batteries come with 12 months manufacturers warranty as standard.
This battery can be installed and operated in any position except permanently upside down. Shelf life of up to 1 year without use and up to 5 years in standby mode before replacement is required; subject to storage between 0-20 degrees celsius.
Nedis BACCH03 Lead-Acid Battery Charger | 6/12 / 12.8 VDC | 3.80 A | Trickle charging | Type C CEE 7/16 | Battery Clamps | Battery type: AGM/Gel/Lead Acid/SLA/VRLA | BlackNEDIS
- Short-circuit protection to prevent over current. Protection against reverse battery polarity. Battery-full protection to prevent overcharging.
|Height||48 cm (18.9 Inches)|
|Length||8.3 cm (3.27 Inches)|
|Weight||0.58 kg (1.28 Pounds)|
|Width||220 cm (86.61 Inches)|
3A 12V 1-1000AH Battery Charger Accumulator Lead Acid Charging Storage Module with Terminals BlueAardich
- The dd30crta is a pwm switch-mode battery charger controller for 12V lead-acid battery in a small package using few external components. Battery charger automatically restarts if the battery voltage falls below 83. 95% of the over-charge voltage in float-charge mode.
The regulation voltage of lead acid battery charger voc at bat pin in over charge mode is set at 14. 8vtypical with Â±1. 5% accuracy. In the overcharge mode, the charging current begins to drop, and when the charging current drops to 38% of the constant charging current, the charger enters the float mode.
End current: when the battery voltage approaches the overcharge voltage, the charger enters the overcharge mode.
The dd30crta battery accumulator is specially designed for charging 12V lead-acid battery with trickle charge, constant current charge, over-charge and float charge mode DD30CRTA will automatically enter sleep mode when input voltage is lower than battery voltage. Constant charge current until the cell voltage of cell charging storage accumulator exceeds 75% of the regulation voltage in.
|Height||2 cm (0.79 Inches)|
|Length||6 cm (2.36 Inches)|
|Weight||0.01 kg (0.02 Pounds)|
|Width||2 cm (0.79 Inches)|
Jencenka 180-240V 20AH Smart Charger for Motorcycle Scooter Wheel Electric Bicycle Lead Acid BatteryJencenka
- Led display, green means Charged OK, Red means Charging. Built in safety recharging system which won't damage your bike's battery, LED indicator light shows when charger is working.
Accesory spare parts for electric mini scooter. Short circuit protection which fits most electric scooter. Good material, durable and easy to use.