As an Amazon Associate I earn from qualifying purchases.
KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency AmplitudeKKmoon
- Adjustable frequency and amplitude. High resolution, can generate sine/triangle/square waveforms. Frequency range: 1Hz-1MHz. Frequency adjustment features coarse tuning and fine tuning. Wide power supply range, use 9-12V external power or 9V batteryNOT Included.
|Height||2 cm (0.79 Inches)|
|Length||12 cm (4.72 Inches)|
|Width||8 cm (3.15 Inches)|
JYETech 08503K miniDDS Function Generator and Servo Controller DIY Kit with Probe FG085NooElec
- Generates servo test/control signals in micro-second resolution with user programmable pulse width, amplitude, and cycle. Diy kit - complex Soldering Required. Generates continuous waveforms of Sine, Triangle, Square, Ramp up and down, and Staircase up and down.
Set the frequency or period, amplitude, and offset with number pad - quick and straight-forward. Frequency period, amplitude, and offset can be incrementally adjusted with rotary encoder.
COVVY XR2206 High Precision Function Signal Generator DIY KitCOVVY
- Frequency adjustment with coarse adjustment, fine tuning. Five precision resolution, triangular wave, can produce sine wave, square wave.
Wide range of power supply, it's suggested to use DC 9-12V external power supply or 9V batteryNOT Included. Fewer components, easy to install. Frequency range: 1Hz-1MHz.
|Height||2.39 cm (0.94 Inches)|
|Length||6.2 cm (2.44 Inches)|
|Width||4.5 cm (1.77 Inches)|
Xr2206 Upgraded Version Signal Generator Kit, Heoolstranger ICL8038 Low Frequency Signal Generator DIY KitHeoolstranger
- Easy to install: this is a diy kit for soldering and installation, all of which are through-hole assemblies for easy installation. Frequency range: 5hz~400kHz; duty cycle range: 2~95% adjustable.
Effective to use: it supports bi-amplifiers and does not block capacitors, and ensures high and low frequency signal distortion. Adjustable frequency and amplitude: the frequency adjustment has coarse and fine adjustment functions.
Professional for use: the signal generator DIY kit is a professional product that produces sine wave / square wave / triangle wave / positive and negative wave sawtooth wave. Higher accuracy: with the ICL8038 and high speed op amps, the accuracy is higher.
Dolity High-Precision Function Signal Generator Kit Support Sine/Triangle/Square WavesFinished productDolity
- Frequency: 1Hz - 1MHz. Voltage supply: 9-12v DC Input or 9V battery. Waveforms: Square, Sine and Triangle. Please note that this product is finished, no need for installing and welding. Impedance: 600 Ohm + 10%.
High Precision Function Signal Generator DIY Kit Sine Triangle Square WaveIPOTCH
- Waveforms: Square, Sine and Triangle. Voltage supply: 9-12v DC Input or 9V battery. Frequency: 1Hz - 1MHz. Impedance: 600 Ohm + 10%. Please note that this product is finished, no need for installing and welding.
Find & Trace Wires and Cables, Network Telephone Lines, Features Alligator Clips & RJ-11 Plug, Test Circuit Continuity, PTE Wire Tracer & Circuit Tester, Tone Generator and Probe KitPTE
- Find wires quickly and accurately - Detect wires in a range of applications including buried wires, broken wires, single strand, etc.
Save time and be safe - thanks to the tone signal you will track your cable quickly and you don't have to take the risk of not knowing exactly where your wires are located. No risk - one-year warranty and friendly customer service from seller TrueToSource! Flexible usage - thanks to the cont mode you can check for short and open circuits, and the RJ11 connector lets you test telephone systems easily.
Adjustable - adjustable sensitivity for differentiating wires in close proximity and avoid false detection.
|Height||2 cm (0.79 Inches)|
|Length||15 cm (5.91 Inches)|
|Weight||0.05 kg (0.11 Pounds)|
|Width||2.4 cm (0.94 Inches)|
DDS Function Signal Generator Module DIY Components Pulsed Sine Triangular Wave Frequency Generator DIY KitMXLY
- The stepped frequencies are 1, 100, 10, 1000 and 10000HZ adjustable. The main board kit of dds signal generator can output DDS signals such as pulse wave, squarewave, triangular wave, positive and negative sawtooth wave, sinusoidal wave and noise wave.
The kit does not contain power supply and needs to be manufactured by ourselves. The highest frequency of dds signal is 65535HZ and the lowest frequency is 1HZ.
Four kinds of high-speed signals, can be output. This signal can be used to unlock the single chip computer as an active signal, 1, 2, 4 and 8MHZ, and the signal amplitude and offset can be adjusted. One set of positive and negative 12V is for op amp and one set of 5V is for MCU and LCD screen.
|Height||0 cm (0 Inches)|
|Length||0 cm (0 Inches)|
|Weight||0.1 kg (0.22 Pounds)|
|Width||0 cm (0 Inches)|
9. KLEIN TOOLS
KLEIN TOOLS Tone Generator Kit, Wire Tracer and Tester with Probe Includes Alligator Clips and RJ11 / RJ12 / RJ45 Plug VDV500-705KLEIN TOOLS
- Alligator clips for unterminated wires. Responsive probe with durable, non-metallic, conductive tip. Toner and probe together perform pin to pin wire map test. Rj45 to rj45 test cable. Simple tone generator and wire tracing probe for non-active wire runs.
|Height||3.81 cm (1.5 Inches)|
|Length||26.67 cm (10.5 Inches)|
|Weight||0.29 kg (0.63 Pounds)|
|Width||18.29 cm (7.2 Inches)|